User Manual

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
68
6. Diagnostics
There are several ways to can check the status and availability of the serial device server.
6.1 Use Standard Ping Command
From the Windows Start menu, select Run and type in “ping <TCP Server IP address>”.
If the serial device server can receive ping requests sent from the host, it will reply to the ping message (Figure
6.1). If the ping request cannot reach the serial device server, timed out message will show (Figure 6.2).
Figure 6.1 Successful Ping Reply
Figure 6.2 Ping Command Failed