ABLELink ® SE5002 Ethernet Serial Server Quick Start Guide Version 1.3 Updated on 2008/02/29 Tel: 886-3-5508137 Fax: 886-3-5508131 http://www.atop.com.
Quick Start Guide Version 1.3 ABLELink® Ethernet Serial Server SE5002 This document intends to provide customers with brief descriptions about the product and to assist customers to get started. For detail information and operations of the product, refer to the product user’s manual in the product CD. 1.
Quick Start Guide Version 1.3 ABLELink® Ethernet Serial Server SE5002 Fig. 1 LAN LED Message Description Ethernet Disconnected Data transmitting on Ethernet at 100Mbps Data transmitting on Ethernet at 10Mbps Table 1. LAN LED Message Off Blinking with Green Blinking with Orange Fig. 1. Fig. 2 COM Port LED Message Off Com 1(2)TX Blinking Com 1(2)RX Blinking Description No data transmitting on COM port Data transmitting on COM port Data Receiving on COM port Table 2. COM Port LED Message Fig. 2. Fig.
Quick Start Guide Version 1.3 ABLELink® Ethernet Serial Server SE5002 A B C. 4 Configuration by Telnet 1. Telnet to SE5002 using DOS command “Telnet IP_address”. Example: telnet 10.0.50.100 2. SE5002’s network, link mode and COM ports settings can be configured in the telnet window Configuration by SerialManager Utility Use SerialManager on Product CD to configure the SE5002.First click” Configuration” then assign a static IP. Configuration by Web Browser 1.
