User manual Manual

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
45
4.10 System Setup
4.10.1 Date/Time Settings
Date and time can be set manually, or using Network Time Protocol (NTP) to automatically
synchronizes with a Time Server. For auto-synching check the box below NTP Server
Settings “Obtain date/time automatically” proceeding then to fill the IP address or host
name for it. If a hostname is entered, the DNS server must be configured properly; a Time
Zone can be selected as well, Figure 4.26.
Figure 4.26
Attention
It is also important to setup Default Gateway and DNS Servers in the Network Settings
properly, so your SW550xC can lookup DNS names and route the mails to the proper default
gateway.