User manual

User manual Version 2.3
ABLELink
® Ethernet-Serial Server GW21R
2. Select the device you want to configure from the IP Address column, click on the Config button, a
configuration window will popup as shown in Figure D2:
Figure D2. Configuration dialog box
3. After you click the “Configure Now” button, the target device will return an ACK message indicating
the modification is successful as shown in the following:
Please note monitor.exe version 2.4 and above requires gw21le.dll library to function properly.
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
52 / 54