User`s manual

User manual Version 1.1

SE5408/SE5416 Multi-port

Serial Server

- 38 -

Fig 45. UDP Link mode by Telnet

Operation: MainÆ [3] COM Port SettingÆ[1-16]Select PortÆ[2]Com Settings

In the COM port settings, one may configure baud rate, parity, data bit, stop bit, flow control, and UART

mode for each Serial port of the SE5408/SE5416 Multi-Port Serial Server device.

Fig 46. Serial Port Setting :Telnet

Alert Settings by Telnet

You may select “4” in the main menu to configure the alert functions of the device. There are two settings,

E-mail address and server setting and alert event trigger setting.