User manual

User manual Version 1.0
SW5002 Wireless Serial Server
Copyright © 2007 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 43 -
Fig 59. TCP Server mode in link mode
 Note: Enable Virtual COM mode if the remote site PC’s “Serial to IP” tool is installed.
6.4.2. TCP Client for Link Mode
Operation: [Main]  [4 Serial Settings]  [1 Link mode]  [2 TCP Client]
User can configure SW5002 to work in TCP Client mode. On destination IP & port (default:
COM1:4660/COM2:4661), Enter the desired destination IP and port (Server IP and port) that SW5002
want to connect to (For example, another SW5002, or PC for data-collection). The SW5002 can
support two destination host computers simultaneously. Fig. 60 is the TCP Client page.
Fig 60. TCP Client mode in link mode
6.4.3. UDP for Link Mode
Operation: [Main]  [4 Serial Settings]  [1 Link mode]  [3 UDP]
SW5002 can be configured to work in UDP mode to establish connection using Unicast or Multicast