INSTRUCTION MANUAL for Angle Curved Top Chest Freezer MMF9106 MMF9109 MMF9112 Please read this user user’s ’s manual thoroughly before using. Keep this manual handy for further reference. Email: Service@atosausa.
Warranty Information One YEAR WARRANTY All claims for parts or labor must be made directly through Atosa. All claims must include: model number of the unit. the serial number. proof of purchase, date of installation. and all pertinent information supporting the alleged defect. In case of compressor replacement under warranty. either compressor or compressor tag must be returned to Atosa along with above listed information. Failure to comply with warranty policies will result in voiding claims.
LABOR COVER AGE FOR COMPONENT FAILURE OR OTHER THE WARRANTY PACKET PROVIDED WITH THE UNIT. ALTERATION. NEGLECT. ABUSE. MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR INSTALLATION, FIRE, FOOD, OR ACTS OF GOD: Atosa is not responsible for the repair or replacement of any parts that are determined to have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God.
Product Information --Preface This instruction manual provides all the necessary information regarding: Use of the freezer Technical specifications Installation and handling Operator procedures and instructions Maintenance operation The manual is to be considered an integral part of the freezer and should be stored in a safe place for future references to insure a long life of the freezer.
Installation Instruction --Unpacking and Handling The freezer is in the package of cardboard box with foam boards protect when it arrives at user’s place. The freezer must be transported and handled with care to avoid posing a hazard to persons or property. Never place a freezer on its side or turn it upside down as this may damage or impair operation of the refrigerated unit.
Operation Instruction --Setting temperature control For safe food storage, let the freezer run for 4 hours continuously, before placing food into the cabinet. The temperature setting of the freezer can be adjusted by moving the thermostat axis position. It can be changed with screw driver or a coin shaped tool. The recommended setting for the freezer is at position “4”. Turn axis to its original position when the articles are frozen. Do not fast freeze for more than 4-5 hours.
Maintenance Instruction --Care and Cleaning The freezer should be cleaned periodically; generally clean it every 30-45 days. Unplug before cleaning and use a soft cloth with a solution of warm water and mild soap to scrub inside and outside of the cabinet. Do not use acids, chemical thinner, gasoline or benzene for cleaning any part of the chest freezer. Dr y it with a soft cloth. Never use water to rinse the freezer.
Technical Service Information --Explore view --Service part list No in explode view 14 13 11 10 9 8 7 4 2 1 Not showed in view Email: Service@atosausa.
--Electric Connection Diagram M F9 MMF9106/MMF9109/MMF9112 θ THERMOSTAT OVERLOAD PROTECTOR L E N RUN LAMP (GREEN) POWER LAMP (RED) NCT CURRENT STARTER STARTING CAPACITOR FAN M COMPRESSOR ～ RUNNING CAPACITOR M F9 Email: Service@atosausa.
--TroubleShooting Problem or Concern The indicator is not on. The compressor doses not start. Possible Cause Common Solution The plug isn’t connected to the socket really. Replug it. no power Connect the socket with power. The indicator is on ,but the com- pressor doesn’t work and buzzes only The power voltage is＜98V. The compressor stops a minute after start, and restart after a few minutes, and so repeatedly. The power voltage is＞132V. The door frequently.
