Owner`s manual
11
139435_A GZ 455 DV 8/28/12
Noncombustible
Material
Finished Floor may be
combustible material
Install cabinet on min. 1 in. riser
to accommodate optional
Backer Plate
Figure 4.10.
Wall materials with Backer Plate installation, cut-away view.
Figure 4.11.
Wall materials without Backer Plate, cut-away view.
Raisedsupportplatformmaybe
combustible material.
Face Plate
37” x 23” (94cmx58.4cm)
CombustibleWallFacing
Backer Plate
43”x303/8” (109.2 cm x 77.1 cm)
Noncombustible
Material
CombustibleWallMaterial
Noncombustible material must overlap Cabinet
ApronPanelwhenBackerPlateisnotused.
Cabinet Apron Panel
Finished non-combustible wall facing,
tile, cultured stone, etc.
4.4 Surround Treatments
4.4.1BackerPlate
The Backer Plate is useful for obscuring seams between
the fireplace cabinet and the surrounding wall facing
materials. The Face Plate is always used with the Backer
Plate.
4.4.2FacePlate
The Face Plate can be used alone but will require that the
CabinetApronPanelbecoveredwithnon-combustible
material before non-combustible finish material is applied.