Owner`s manual
29
139435_A GZ 455 DV 8/28/12
Remote Transmitter Controls, cont’d.
Temperature Indication Display
With the transmitter in the OFF position, press the
ThermostatKeyandtheModeKeyatthesame
time. The display screen will show the current
room temperature cycling between Fahrenheit and
Celsiusindicatorseachtimethekeysarepressed
simultaneously.Seefig.7.4.
TurnontheBurner
PresstheON/OFFKeyontheTransmitter.
The display will show all the active icons. At the
sametime,theReceiverwillactivatethePilot
Ignitor. First the pilot will ignite, followed shortly
bytheburner.Asingle”beep”fromtheReceiverwill
confirm reception of the command.
TurnofftheBurner
PresstheON/OFFKey.Thedisplaywillshowonly
the room temperature and icon. At the same time,
theReceiverwilldeactivatethecallforheatandthe
burnerwillshutdown.Fig.7.5.Asingle”beep”from
theReceiverwillconfirmreceptionofthecommand.
RemoteBurnerControl
There are six flame levels available.
With the system ON, and the burner flame level
atmaximum,presstheDownArrowKeyonceto
reduce the flame height by one step. Each time the
DownKeyispressed,theflamewillstepdownuntil
the burner is finally turned off. Fig. 7.6.
TheUpArrowKeywillincreasetheflameheight
eachtimeitispressed.IftheUArrowKeyispressed
while the system is on but the flame is off, the
flame will come on in the High position. Figs. 7.7- 7.9.
Asingle“beep”willconfirmreceptionofthecom-
mand.
Room Thermostat (Transmitter Operation)
TheRemoteControlcanoperateasaroomthemostat.
The themostat can be set to a desired temperature to
control the comfort level in a room.
Toactivatethisfunction,presstheThermostatKey,
(Fig. 7.2) The display will indicate that the room
thermostatis“ON”andthecurrentSetTemperature
is now displayed. Fig. 7.10.
ToadjusttheSetTemperature,presstheUpor
DownArrowKeysuntilthedesiredSetTemperature
is displayed. Fig. 7.11.
Figure 7.4. Room temperature readings
Figure 7.5. Burner shut-down
Figure 7.7. Flame Level 1.
Figure 7.6. Burner OFF.
Figure 7.8. Flame Level 7.8.
Figure 7.9. Flame Level 7.9.
Figure 7.10. Thermostat ON
Figure 7.11.
Change Set Temperature
RoomTemperature
Set Temperature