User manual

Atrie DB108Ethernet User Manual
Page 14 Total 17 Pages
• Define the “Start IP address” and the “End IP address” of DHCP server (for example, from
192.168.1.2 to 192.168.1.254).
• Input the value of lease (Measured by the second, 0 indicates permanently valid).
As Figure 4.2, open DHCP server, computer will set the IP Address of network card with one of the address
10.10.10.11 ～ 10.10.10.254.
Figure 4.2
Note
： When you use the DHCP Server, please pay attention to having multi-DHCP Server in one LAN.
4.2 PASSWORD CONFIGURATION
When you configure ADSL MODEM through an Internet browser, the system requires user name and
password to validate access permission. The factory sets the modem at a default username of “admin” and the
password of “password”. The username is unchanged. You can enter the “password configuration” on
Configuration column to change the password.
Attention: please remember the password after change, otherwise you will not be able to
change configuration after saving setting