Specifications

Purchase order no. 7/EDP/COMP/106 Dated : 30/09/2011
11
S.
No.
DESCRIPTION
Quantity
UNIT
PRICE
inclusive
of Excise,
Custom
Duty,
Freight &
Forwardin
g,Insuran
ce,
Installatio
n &
Commissi
oing
Charges
CST /
ST (In
Figure)
Service
Tax (In
Figure)
Total Unit
Price F.O.R
Destination
incl. of
CST/ST,
Service Tax,
,Freight
&Forwardin
g, Custom
Duty,
Insurance,
Installation
&
Commissioi
ng Charges
etc.
Total
Amount
F.O.R
Destination
incl. of
CST/ST,
Service
Tax, Freight
&Forwardin
g, Custom
Duty,
Insurance,
Installation
&
Commissioi
ng Charges
etc.
All figures in Rs.
1 2 3 4 5 6 7 8=7*3
Input Voltage , Output Voltage & Frequency, Batt
Voltage, Batt Current, Load
Current in Amps
Minimum 100 records of faults generated with date
and time. FIFO method
PROTECTION
Over Load
protection
MCBs both at Input & Output,
Over Voltage protection
ADDITIONAL FEATURES
Static and Manual bye pass switch should be
available
Caster wheels should be available for easy
mobility of the UPS Unit of 5 KVA.
Cold start facility on full load should be available.
Noise level less than 45 db
INDICATIONS
Battery charging/status Indication
Bye-pass ON/OFF indication
Mains ON/OFF indication
Inverter ON/OFF
ALARM WITH INDICATIONS
Overload, Fault, Battery Voltage Low/Discharged
3.2
BATTERIES for S no 3.1 with 60 minutes
backup
4 37500 4687.5 0 42187.5 168750
Type
Sealed Maintenance free.
Make Panasonic/CSB/Yuasa/Exide
Back-up time
At least 60 minutes on full load
Operating
Temperature
Range
0-45 degree centigrade.
Rack Rack for Batteries to be
included (As per
Purchaser/Space Requirement)
4
NETWORKING COMPONENTS (ACTIVE)
4.1
ROUTER with the following Specifications For
Chandigarh
1 796800 39840 0 836640 836640
Architecture:
Should have support for Data, Voice, Video,
Security and mobility services
Should be chassis based & modular architecture
with multicore processor for scalability and should
be a single box configuration for ease of
management.
Should have integrated redundant power supply.
Should have embedded hardware based (IPSec
and SSL) Encryption card accelerator
Should support complete Firewall, IPS features.
Should have 1Gb RAM should be upgradeable to
2Gb
Should have 256Mb flash and should be
upgradeable to 4Gb
Should have four free slots for future expansion.
Should have integrated USB port to provide
console, storage and secure token capabilities
Chassis should be 19” rack mountable type.