User Manual

6
Fig.6
Assembling Your Vacuum
• Push/press fit the hose into the lid opening. (Fig 7)
Fig. 8
Fig. 7
• To connect the hose and attachment wand, slide the hose over the hose end wand attachment and
over the bump by approx. ½”. (Fig. 8)
• Take the hose end attachment wand and insert it into the lower attachment wand (utensil end). (Fig.9)
Fig. 9
• Secure the utensil to the end of wand. Align the brass ring with the groove on the floor tool to ensure a
secure fit (Fig. 10)