Specifications

INTERTEK TESTING SERVICES
FCC ID: UVD20071228001
3
1.3 Test Methodology
Both AC mains line-conducted and radiated emission measurements were
performed according to the procedures in ANSI C63.4 (2003). Radiated
emission measurement was performed in semi-anechoic chamber and
conducted emission measurement was performed in shield room. For radiated
emission measurement, preliminary scans were performed in the semi-
anechoic chamber only to determine the worst case modes. All radiated tests
were performed at an antenna to EUT distance of 3 meters, unless stated
otherwise in the "Justification Section" of this Application.
1.4 Test Facility
The Semi-Anechoic Chamber & shielded room facility used to collect the
radiated & conducted emissions data is SHENZHEN ACADEMY OF
METROLOGY & QUALITY INSPECTION located at Longzhu Road,
Shenzhen. This test facility and site measurement data have been fully placed
on file with the FCC.