Operation Manual

23
Speed dial memory overview and
storage
Speed dial memory overview
This telephone has 10 speed dial memory
locations where you can store telephone numbers
you wish to dial using fewer keys than usual.
Each speed dial memory location can store a
telephone number with up to 24 digits.
Speed dial memory storage
Use the following steps to store a telephone
number in a desired speed dial memory location.
When the telephone is idle, press MEM.
Press DIR/ or CID/ until STORE is blinking.
Press SELECT, the screen shows ENTER NUMBER.
Use the dial pad keys to enter the telephone
number (up to 24 digits).
To backspace and erase a digit, press DIR/ .
To insert a space between digits, press
CID/ . A dash appears on the screen.
To insert a three-second dialing pause, press
CID/ twice. A P appears on the screen.
To insert a flash signal for using the service
supplied by your telephone service provider,
press FLASH. An F appears on the screen.
To copy the last number dialed (up to 24
digits), press REDIAL.
Press SELECT. The screen shows
ENTER LOCATION?
Press a dial pad key (0 through 9) to choose
the desired speed dial memory location for the
new entry. The screen shows STORED and then
ENTER NUMBER.
Repeat steps 4 through 6 above to store a
number in another speed dial memory location.
-OR-
Press REMOVE to return to idle mode.
1.
2.
3.
4.
•
•
•
•
•
5.
6.
7.
ENTER NUMBER
8888832445_
ENTER LOCATION?
STORED
ENTER NUMBER
_
NOTE: If you enter
more than 24 digits in a
telephone number in step
4, the screen shows ONLY
24 ALLOWED.
REVIEW STORE
blinking
Speed dial memory