Operation Manual

24
Speed dial memory
Reviewing and dialing a speed dial
number
To review a speed dial number
Use the following steps to view a telephone
number stored in a speed dial memory location.
When the telephone is idle, press MEM.
Press DIR/ or CID/ until REVIEW is blinking.
Press SELECT, the screen shows
ENTER LOCATION?
Press a dial pad key (0 through 9) to choose the
desired speed dial memory location. The screen
shows the telephone number stored in that
memory location.
Press FLASH to return to idle mode.
NOTES:
If there is no number in the speed dial memory
location you selected, the screen shows NO
NUMBER.
The screen can show up to 12 digits in the
second row. So, if the number is longer than
12 digits, the screen shows the first 12 digits
and then scrolls to the following digits of the
number.
To dial a speed dial number
Use the following steps to dial a desired telephone
number stored in a speed dial memory location.
Lift the handset or press SPEAKER.
Press MEM. The screen displays ENTER
LOCATION?
Press a dial pad key (0 through 9) to choose
the desired speed dial memory location. The
telephone dials the number automatically.
-OR-
Refer to steps 1 through 4 in To review a speed
dial number above to show the telephone
number stored in the desired memory location.
Press DISPLAY DIAL to call using the
speakerphone or press DISPLAY DIAL and then
lift the handset to use the handset. The telephone
dials the displayed number automatically.
1.
2.
3.
4.
5.
•
•
1.
2.
3.
1.
2.
ENTER LOCATION?
8887227702
8887227702
12:00
AM
11-20
REVIEW STORE
blinking
ENTER LOCATION?