Operation Manual

31
Directory
Directory storage
Use the following steps to store a name and
telephone number in the directory.
When the telephone is idle, press DIR/ to enter
the directory.
Press SELECT. The screen shows ENTER NUMBER.
To copy the last number dialed, press
REDIAL/PAUSE (up to 24 digits).
-OR-
Use the dialing keys to enter the telephone
number (up to 24 digits).
To backspace and erase a digit, press REMOVE.
To insert a four-second dialing pause, press
REDIAL/PAUSE. A P appears on the screen.
Press SELECT. The screen shows ENTER NAME.
Use the dialing keys and Character chart on
page 30 to enter the letters, digits or symbols (up
to 15 characters). Press the key repeatedly until
the desired character shows on the screen.
To backspace and erase a character, press
REMOVE.
Press SELECT to save the entry. The screen
shows STORED with a confirmation tone and
then returns to the directory.
Repeat Steps 2 through 6 to store more directory
entries.
-OR-
Press FLASH to return to idle mode.
NOTES:
If you copy or enter more than 24 digits in a
telephone number in Step 3, the screen shows
ONLY 24 ALLOWED with an error tone.
If you enter more than 15 characters in a name
in Step 5, the screen shows ONLY 15 ALLOWED
with an error tone.
If there are already 25 stored entries, after
you press SELECT in Step 2, the screen shows
MEMORY FULL with an error tone and then
returns to the directory.
1.
2.
3.
•
•
4.
5.
•
6.
7.
•
•
•
12:00
AM
11-20
15
16 CALLS 5 NEW
12:00
AM
11-20
15
CHRISTINE SMITH
888-722-7702
12:00
AM
11-20
15
ROBERT BROWN_
8003604121
12:00
AM
11-20
15
ENTER NUMBER
8003604121_
12:00
AM
11-20
15
ENTER NAME
8003604121
12:00
AM
11-20
15
STORED