Operation Manual

39
Caller ID operation
Storing a call history entry in the
directory
Use the following steps to store the telephone
number and name of a call history entry in the
directory.
When the telephone is idle, press CID/ to
enter the call history.
Press DIR/ or CID/ to scroll to the desired
caller ID entry.
Press MENU or SELECT. The screen shows COPY
TO DIR. Press MENU or SELECT again to store
the displayed telephone number in the directory.
The screen shows STORED with a confirmation
tone, then returns to the call history.
-OR-
If you need to add or remove the area code
or a 1 at the beginning of the number, do the
following:
Press # (pound key) repeatedly to scroll
through the various dialing formats (1 +
area code + seven-digit number, seven-digit
number, 1 + seven-digit number, or area code
+ seven-digit number).
Press MENU or SELECT to store the displayed
telephone number in the directory. The
screen shows STORED with a confirmation
tone, then returns to the call history.
Press FLASH to return to idle mode.
NOTES:
If there is no telephone number in the displayed
call history entry when you press MENU or
SELECT in Step 3, the telephone plays an error
tone.
If the directory is full, the screen shows
MEMORY FULL and there is an error tone.
1.
2.
3.
a.
b.
4.
•
•
12:00
AM
11-2016
15
CHRISTINE SMITH
888-722-7702
12:00
AM
11-20
15
STORED