User Manual

Note: 1.The Printer may override your selection for best fit.

2. If your selection is not supported by the printer, the oscilloscope uses the

Default setting.

3. The oscilloscope was designed to print to any PictBridge compatible

printer. Refer to product documentation for your printer to determine if the

printer is compatible with PictBridge.

Picture 2-79

To print screen picture, follow these steps:

1. Connect the oscilloscope to a PictBridge compatible printer.

1) Insert one end of a USB cable into the USB Device port on the oscilloscope.

2) Insert the other end of the cable into the PictBridge port on a PictBridge

compatible printer.

2. Print a Screen image

1) Power on the oscilloscope and the printer (The printer recognizes the oscilloscope

only when the printer is powered on).

2) Press the UTILITY button to display “UTILITY” menu.

3) Press the “Next Page” option button.

4)Press the “Back USB” option button to select “Printer”

5) Press the “Print Setup” option button to display “Print setup” menu.

6) Set up the print setup option according to your need. The oscilloscope queries the

printer, and only displays options and values that the printer supports.