User Manual

Picture 1-2 Display area

1. Trigger status

Armed. The oscilloscope is acquiring pre-trigger data. All triggers are ignored in

this state.

Ready. All pre-trigger data has been acquired and the oscilloscope is ready to accept a

trigger.

Trig’d. The oscilloscope has seen a trigger and is acquiring the posttrigger data.

Stop. The oscilloscope has stopped acquiring waveform data.

Auto. The oscilloscope is in auto mode and is acquiring waveforms in the absence of

triggers.

Scan. The oscilloscope is acquiring and displaying waveform data continuously in scan

mode.

2. display the position of the present waveform window

3. Marker shows horizontal trigger position. Turn the HORIZONTAL POSITION

knob to adjust the position of the marker.

4 “Print Key” option is set to “Print Picture”.