User Manual

USB Flash Drive to the USB Host port.
Ŷ USB Flash Drive Pull Out! : This information will appear when you pull out the
USB Flash Drive.
Ŷ Store Data Success! : Save setup data, waveform data or picture data to the
internal of the oscilloscope or USB flash successful.
Ŷ Ready Data Success! : Read setup data or waveform data from the internal of the
oscilloscope or USB flash successful.
Ŷ Please set Back USB to printer! : Press the “S/div” knob will appear this
information on the screen when the “Print Key” option is set to “Print Picture” and
the “Back USB” option is set to “Computer”.
Ŷ USB Flash Drive isn’t connected! : When the “Save To” option is set to “File” or
the “Print Key” option is set to “Save Picture” in “Save/Recall” menu , Press the
“Save” option button or the “S/div” knob before inverting the USB Flash Drive to
the USB Host port will appear this information on the screen.
Ŷ Record Wave Success! ˖
This message will appear when you finish recording
waveforms.
119