User Manual

“Print Key” option is set to “Save Picture”.

“Back USB” option is set to “Computer”.

“Back USB” option is set to “Printer”.

6. Show the waveform’s channel position.

7. On-screen markers show the ground reference points of the displayed waveforms. If

there is no marker, the channel is not displayed.. Display signal source.

8. Signal Coupling symbol.

9. Readout shows the vertical factor of the channels.

10. “B” icon shows that bandwidth function is open.

11. Readout shows the main time base setting.

12. Readout shows window time base setting if it is in use.

13. Icon shows the trigger type for the triggering

14. Readout shows the horizontal position.

15. Readout shows the trigger voltage.

16. Readout shows present signal frequency.