User Manual

Measure System
Auto Measure
(32 Types)
Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean,Crms, Vrms,
ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time,
Freq, Period,+ Wid,ˉWid, ˇDut, ˉDut, BWid, Phase, FRR, FRF,
FFR, FFF, LRR, LRF, LFR, LFF
Cursor Measure Manual mode, Track mode and Auto mode
Trigger System
Trigger Types Edge, Pulse Width, Video,Slope, Alternative
Trigger Source
CH1ǃCH2ǃEXTǃEXT/5ǃAC Line
Trigger Modes Auto, normal, Single
Trigger
Coupling
AC, DC, LF rej, HF rej
CH1,CH2: ±6divisions from center of screen
EXT: ±1.2V
Trigger Level
Range
EXT/5: ±6V
Trigger
Displacement
Pre-trigger˖˄Memory depth/˄2*sampling˅˅,
Delay Trigger: 260DIV
Holdoff range 100ns – 1.5s
Edge Trigger Edge type: Rising, Falling, Rising and Falling
Trigger Modes: ( ˚ , ˘ , ˙ )positive Pulse Width, ( ˚ , ˘ ,
˙)Negative Pulse Width
Pulse Width
Trigger
Pulse Width Range: 20ns – 10s
Support signal Formats: PAL/SECAM, NTSCVideo Trigger
Trigger condition : odd field, even field, all lines, line Num
(˚,˘, ˙) Positive slope, (˚,˘, ˙) Negative slope
Slope Trigger
Time: 20ns-10s
CH1 trigger type: Edge, Pulse, Video, SlopeAlternative
Trigger
CH2 trigger type: Edge, Pulse, Video, Slope
X-Y Mode
X-pole Input /
Y-Pole Input
Channel 1 (CH1) / Channel 2 (CH2)
Phase Error ±3 degrees
Sample
Frequency
XY mode has a breakthrough that trad oscilloscopes restrict sampling
rate at 1MSa/s and ADS1000C supports 5KSa/s ̚
200MSa/s,ADS1000CA supports 5KSa/s ̚ 500MSa/s,ADS1000CE
supports 5KSa/s̚1GSa/s,(1-2.5-5 sequence)
Hard Ware Frequency Counter
Reading resolution 6 Bytes
Range DC Couple, 10Hz to MAX Bandwidth
Signal Types Satisfying all Trigger signals(Except Pulse width trigger and
Video Trigger)
125