User Manual

2.1 Menu and control button
Showing as the following picture:
Picture 2-1
All models:

Ŷ CH1ǃ
CH2: Channel 1, channel 2 menu control button.
Ŷ MATH: MATH function control button.
Ŷ REF: Reference waveforms control button.
Ŷ HORI MENU: Horizontal control button.
Ŷ TRIG MENU: Trigger control button.
Ŷ SET TO 50%: Set the trigger level to midpoint of the signal amplitude.
Ŷ FORCE: Use the FORCE button to complete the current waveform acquisition
whether the oscilloscope detects a trigger or not. This is useful for Single
acquisitions and Normal trigger mode.
Ŷ SAVE/RECALL: Display the Save/Recall Menu for setups and waveforms.
Ŷ ACQUIRE: Display the Acquire Menu.
Ŷ MEASURE: Display the automated measurements menu.
Ŷ CURSORS: Display the Cursor Menu. Vertical Position controls adjust cursor
position while displaying the Cursor Menu and the cursors are activated.
Cursors remain displayed (unless the “Type” option is set to “Off”) after
leaving the Cursor Menu but are not adjustable.
Ŷ DISPLAY: Display the Display Menu.
Ŷ UTILITY: Display the Utility Menu.
Ŷ DEFAULT SETUP: Recall the factory setup.
Ŷ HELP: Enter the online help system.
11