User Manual

2.2 Connector

Picture 2-2

Ŷ CH1ǃ

CH2: Input connectors for waveform display.

Ŷ EXT TRIG: Input connector for an external trigger source. Use the Trigger Menu

to select the “Ext” or “Ext/5” trigger source.

Ŷ Probe Component: Voltage probe compensation output and ground. Use to

electrically match the probe to the oscilloscope input circuit.

Note˖If you connect a voltage source to a ground terminal, you may damage the

oscilloscope or the circuit under test. To avoid this, do not connect a voltage source to

y g

round terminals.