User Manual

Set bandwidth to
20MHZ
Picture 2-9
Bandwidth Limit
S
y
mbol
Ɣ Press“CH1”ĺ“BW Limit”ĺ “Off”, Set bandwidth Limited to close state, the High
Frequency component in the tested signal could pass.
Set off bandwidth
Picture 2-10
3. Volts/Div settings
Vertical scale adjust have Coarse and fine two modes, Vertical sensitivity range
of ADS1000C/CE are 2mV/div̚5V/div scale. Vertical sensitivity range of
ADS1000CA is 2mV/div̚10V/div scale.
Take the CH1 for example:
Ɣ Press“CH1”ĺ“Volts/Div”ĺ“Coarse”. It is the default setting of Volts/Div, and it
makes the vertical scaling in a 1-2-5-step sequence from 2mv/div, 5mv/div,
10mv/div to 5v/div.
22