User Manual

2.6.4 Using Ref

The reference control saves waveforms to a nonvolatile waveform memory. The

reference function becomes available after a waveform has been saved.

Table 2-11 REF function menu˖

Option Setting Introduction

Source CH1

CH2

CH1 off

CH2 off

Choose the waveform display to store.

REFA

REFB

 Choose the reference location to store or recall a

waveform.

Save  Stores source waveform to the chosen reference

location.

REFA/REFB on

off

Recall the reference waveform on the screen.

Turn off the reference waveform.

Press the Ref button to display the “Reference waveform menu”.

Picture 2-23

Operation step˖

1.Press the “REF” menu button to display the “Reference waveform menu”.

2.Press the “Source” option button to select input signal channel.

3. Turn the

vertical “POSITION” knob and “Volt/div” knob to adjust the vertical

position and scale to conformable positions.

4.Press the third option button to select “REFA” or “REFB” as storage position.

5. Press the “Save” option button.

6. Press the bottom option button to select “REFA On” or “REFB On” to recall