User Manual

Picture 2-34

Operate Instruction:

1. Set up Type

1) Press the “TRIG MENU” button to display “Trigger” menu.

2) Press the “Type” option button to select “Video”.

2. Set up Polarity

Press the “Polarity” option button to select “

” or “ ”.

3. Set up synchronization

1) Press the “Sync” option button to select “All Lines”, “Line Num”, “Odd Field”,

and “Even Field”.

2) If you select “Line Num”, you can turn the “Universal” knob to set the appointed

line number.

4. Set up Standard

1) Press the “Next Page Page 2/2” option button.

2) Press the “Standard” option button to select “PAL/SECAM” or “NTSC”.

Slope Trigger˖Trigger on positive slope of negative slope according to setup time

of the oscilloscope.

Table 2-19 Slope trigger function menu 1

Option Setting Instruction

Type Slope Trigger on positive slope of negative

slope according to setup time of the

oscilloscope.

Source

&+

&+

Select trigger source.