User Manual

(;7
(;7
When






Select trigger condition.
Time
LJSet timeLj
Turn the “Universal” knob to set
slope time. Time setup range is
20ns-10s.
Next
Page
Page 1/2 Enter the second page of slope
trigger.
Picture 2-35
Table 2-20 Slope trigger function menu 2
Option Setting Instruction
Type Slope Trigger on positive slope of
negative slope according to
setup time of the oscilloscope.
Vertical





Select the trigger level that
can be adjusted by “LEVEL”
knob. You can adjust “LEVEL
A”, “LEVEL B” or adjust
them at the same time.
Auto
Use this mode to let the acquisition
free-run in the absence of a valid
trigger; This mode allows an
untriggered, scanning waveform at
100 ms/div or slower time base
settings.
Mode


Normal Use this mode when you want to see
only valid triggered waveforms;
84