User Manual

Mode Pulse
Set trigger type of the vertical channel signal to
Pulse trigger.
When
 
 
 



Select how to compare the trigger pulse relative
to the value selected in the Set Pulse Width
option.

 
 
 

Next Page Page 1/2
Enter the second page of Alternative trigger
menu.
Table 2-23 Set trigger mode to pulse trigger function menu 2:
Option Setting Explain
Set Width
20.0ns ̚
10.0s
Selecting this option can turn the universal to set up
the pulse width.
Set up Enter the “Trigger Setup Menu”(see table 2-14).
Next Page Page 2/2 Press this button to return the first page.
Table 2-24 Set trigger mode to video trigger function menu1:
T
Option
Setting Instruction
Type Alternative The trigger signal comes from two vertical
channels when you use alternative trigger. In this
mode, you can observe two irrelative signals at the
same time.
Source
CH1
CH2
Set trigger type information for CH1 signal
Set trigger type information for CH2 signal
Mode Video
Set trigger type of the vertical channel signal to
Video trigger.
Polarity

(Normal)

(Inverted)
Normal triggers on the negative edge of the sync
pulse.
Inverted triggers on the positive edge of the sync
pulse.
Next Page Page 1/2 Enter the second page of Alternative trigger menu.
Table 2-25 Set trigger mode to video trigger function menu 2:
Option Setting Instruction
Sync
 

Line Num
All lines
Odd field
Even Field

Select appropriate video sync.


Standard NTSC
Pal/Secam
Select the video standard for sync and line number
count.
51