User Manual

Advantage: You can use this mode to reduce random noise.

Picture 2-43 Average mode

 Equivalent Time Sampling:

The equivalent time sampling mode can achieve up to 20 ps of horizontal

resolution

(equivalent to 50GSa/s). This mode is good for observing repetitive waveforms.

Ŷ Real Time Sampling: ADS1000 has the highest Real-time sampling rate

up to 2GSa/s.

Ŷ “RUN/STOP” Button: Press the RUN/STOP button when you want the

oscilloscope to acquire waveforms continuously. Press the button again to stop the

acquisition.

Ŷ “SINGLE” Button: Press the SINGLE button to acquire a single waveform. Each

time you push the SINGLE button, the oscilloscope begins to acquire another

waveform. After the oscilloscope detects a trigger it completes the acquisition and

stops.

When you push the RUN/STOP or SINGLE buttons to start an acquisition, the

oscilloscope goes through the following steps:

1˅. Acquire enough data to fill the portion of the waveform record to the left of the

trigger point. This is also called the pre-trigger.

2˅. Continue to acquire data while waiting for the trigger condition to occur.

3˅. Detect the trigger condition.