User Manual

7. The measurement values are displayed on the top of the left corner:
If the measurement type is set to “Voltage”, the values are:
The value of Cur A: CurA
The value of Cur B: Cur B
The voltage increment between Cursor A and Cursor B: ƸV
If the measurement type is set to “Time”, the values are:
The value of Cur A: CurA
The value of Cur B: Cur B
The time increment between Cursor A and Cursor B: TƸ
The reciprocal of time increment between Cursor A and Cursor B: 1/ TƸ
Picture 2-53
Track mode
Table 2-33 Track mode function menu:
Option Setting Instruction
Cursor Mode Track In this mode, set track cursor measure.
Cursor A CH1
CH2
NONE
Set the input signal channel that the
Cursor A will measure.
Cursor B CH1
CH2
NONE
Set the input signal channel that the
Cursor B will measure.
Cur A Select this option, turn the “Universal”
knob to adjust horizontal coordinate of
Cursor A.
Cur B Select this option, turn the “Universal”
knob to adjust horizontal coordinate of
Cursor B.
86