User Manual

Table 2-38 Auto measure function4-Delay measure menu:
Option Setting Instruction
Source
CH1ǃCH2ǃMATHǃ
REFAǃREFB
Select input signal source for
Delay measure.
Type
Phaseǃ
FRRǃFRFǃFFRǃFFFǃ
LRRǃLRFǃLFRǃLFF
Press the “Type” button or turn the
“Universal” knob to select Delay
measure parameter.
ǃ ǃ ǃ
ǃ ǃ ǃ
ǃ ǃ
Display the corresponding icon
and measure value of your
selected Delay measure parameter.
Return Return to the first page of auto
measurement menu.
Table 2-39 All Measurement function menu:
Option Setting Instruction
Source CH1
CH2
Select input signal channel.
Voltage On
Off
Turn on the all measurement function to measure
voltage parameters.
Turn of the all measurement function to measure
voltage parameters.
Time On
Off
Turn on the all measurement function to measure
Time parameters.
Turn of the all measurement function to measure
Time parameters.
Delay On
Off
Turn on the all measurement function to measure
Delay parameters.
Turn of the all measurement function to measure
Delay parameters.
Return Return to the “All Measure main menu”.
Table 2-40 Introduction of the Measure Type:
Measure Type Introduction
Vmax
The most positive peak voltage measured over the
entire waveform.
Vmin
The most negative peak voltage measured over the
entire waveform.
Vpp
Measures the absolute difference between the
maximum and minimum peaks of the entire
waveform.
Vtop
Measures the highest voltage over the entire
waveform.
Vbase
Measures the lowest voltage over the entire
waveform.
Vamp
Voltage between Vhig and Vlow of a waveform.
Vavg
The arithmetic mean over the first cycle in the
waveform.
Mean
The arithmetic mean over the entire waveform.
73