User Manual

1˅. Press the “MEASURE” button to enter the “Auto measurement”

menu.

2˅. Press the top first option button to enter the “second measurement

menu”.

3˅. Select measure type. If you press the “Voltage” option button,

“Voltage measurement” menu will display on the screen.

4˅. Press the “Source” option button to select “CH1” or “CH2”

according to input signal channel.

5˅. Press the “Type” option button to select the parameter type that

you want to measure. The corresponding icon and value will

display below the measure parameter.

Picture 2-58

6˅. Press the “Return” option button to return the home page of “Auto

Measurement” menu. The selected parameter and the

corresponding value will display on the top first position of the

home page.

You can display the other parameters and its’ value on the

corresponding position using the same way, and the screen can

display five parameters at one time.

If you want to measure time parameters using all measure function,

please follow next steps:

1˅. Press the “MEASURE” button to enter the “Auto Measure menu”.

2˅. Press the top option button to enter the second page of “Auto

Measure menu”.

3˅. Press “All Mea” option button to enter the “All Measure menu”.