User Manual

of the file or the directorys , then store the files.

Ŷ Save Setups to Device˖

The complete setup is stored in nonvolatile memory.

When you recall the setup, the oscilloscope will be in the mode from which the setup

was saved.

The oscilloscope saves the current setup if you wait three seconds after the last

change before you power off the oscilloscope. The oscilloscope recalls this setup the

next time you apply power.

Table 2-41 Save setup to device function menu:

Option Setting Introduction

Type Setups Menu for the Storage/Recall setting in the

oscilloscope

Save to Device Save setup to the oscilloscope’s internal memorizer.

Setup No.1 to No.20 Press the “Setup” option button or turn the

“universal” knob to select storage position.

Save  Accomplish the storage

Recall  Recall the storage in the “Setup” operation

Picture 2-64

Save setups to the oscilloscope’s internal memorizer or recall saved setups from

it .Follow these steps:

For example: Save setup that the oscilloscope displays waveform as the form of

“Dots” to the oscilloscope’s internal memorizer.

1˅. Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” menu.

2˅. Press the “Type” option button to select “setups”.