User Manual

3˅. Press the “Save to” option button to select “Device”.
4˅. Press the “Setup” option button to select “No.1”.
5˅. Press the “DISPLAY” button to enter the “Display” menu.
6˅. Press the “Type” option button to select “Dots”.
7˅Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” menu.
8˅Press the “Save” option button.
If the display type has been changed, you want to recall this setup.
Follow these steps:
1˅ Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” display menu.
2˅ Press the “Type” option button to select “Setups”.
3˅ Press the “Save to” option button to select “Device”.
4˅ Press the “Setup” option button or turn the “Universal” knob to select “No.1”.
5˅ Press the “Recall” option button.
Ƶ
 Save Setup to USB flash drive
Table 2-42 Save setup to USB flash drive function menu:
Option Setting Introduction
Type Setups Menu for the Storage/Recall settings.
Save to File Save setup data to USB flash drive.
Save Go to the Save/Recall interface
Picture 2-65
08