User Manual

Ŷ Save waveforms to USB flash drive

Table 2-45 Save waveforms to USB flash drive function menu˖

Option Setup Introduction

Type Waveforms Menu for the Storage/Recall waveforms.

Save to File Save waveforms to USB flash drive.

Save  Accomplish the storage.

Picture 2-68

Save waveforms to USB flash drive, follow these steps:

1˅ Input a sine signal to channel 1, press the “AUTO” button.

2˅ Press the “SAVE/RECALL” button to enter the “SAVE/RECALL” display menu.

3˅ Press the “Type” option button to select “Waveforms”.

4˅ Insert USB flash drive to USB host port of the oscilloscope and wait that the

oscilloscope has initialized USB flash drive (about ten seconds).

5˅ Press the “Save to” option button to select “File”.

6˅ Press the “Save” option button then you’ll go into the Save/Recall interface.

7˅ Create a file then press the “Confirm”button(about ten seconds, there is a

prompting message that “Save data success” displaying on the screen), now

waveform data have been saved to USB flash drive.

Recall saved waveform data form USB flash drive, follow these steps:

1˅. Press the “SAVE/RECALL” button.

2˅. Press the “Type” button to select “Waveforms”.

3˅. Insert USB flash drive to USB host port of the oscilloscope and wait that the

oscilloscope has initialized USB flash drive (about ten seconds).

4˅. Press the “Save to” option button to select “File”.