User Manual

5˅. Press the “Save” option button then go into the Save/Recall interface.

6˅. Choose the file you want then press the “Load” option button (about five seconds,

there is a prompting message that “Recall data success” displaying on the screen),

now waveform data have been recalled from USB flash drive.

 Save Picture

Waveform interface image can be saved to USB flash drive, but they can’t be

recalled. You can open them on correlative computer software.

Table 2-46 Picture storage function menu:

Option Setting Introduction

Type Pictures Menu for the Storage/Recall waveform

interface image.

Print Picture When the oscilloscope connect to the

printer and “Back USB” option is set

to “Printer”, select “Print Picture” and

press the “PRINT” button to print the

screen image.

Print Key

Save Picture



When the USB flash drive insert to the

USB Host interface(now the USB flash

drive open status icon displays on the

top of the screen), select “Save

picture” and press the “Save” knob to

go into the Save/Recall interface.

Save  Go to the Save/Recall interface.

Picture 2-69

Save waveform interface image to USB flash drive, follow these steps:

1). Select the screen image that you want .

2) Press the “SAVE/RECALL” button to enter “SAVE/RECALL” menu.

3). Press the “Type” option button to select “Pictures”.

4). Insert USB flash drive to USB host port of the oscilloscope and wait that the