User Manual

oscilloscope has initialized USB flash drive (about ten seconds).

5). Press the “Print Key” option button to select “Save Picture”.

6). Press the “Save” option button then go into the Save/Recall interface”.

7). Press the “Save” buton then you’ll go into the Save/Recall interface

8). Create the picture name then press the “Confirm”button(about forty seconds, there

is a prompting message that “Save data success” displaying on the screen), now

picture data have been saved to USB flash drive.

Ŷ SAVE/RECALL REFERENCE WAVEFORM˖

The oscilloscopes can store two reference waveforms in nonvolatile memory.

The oscilloscope can display reference waveforms at a time.

Reference waveforms are not adjustable, but the oscilloscope does display the

horizontal and vertical scales at the bottom of the screen.(Refer to 2.6.4)

Save/Recall CSV

Table 2-47 CSV storage function menu:

Option Setting Introduction

Type CSV Menu for the Storage CSV file to USB flash

drive.

Data Depth Displayed

Maximum

Set to store displayed waveform data to CSV

file.

Set to store maximum waveform data to

CSV file.

Para Save On

Off

Set whether store parameters to CSV file or

not.

Save Go to the Save/Recall interface.