Data Sheet

Connector and impedance
N-Type female, 50 Ω Nominal.
10 MHz
0 dBm to +10 dBm
10 MHz
0 dBm to +10 dBm
BNC female, 50 Ω Nominal
RF input
10 MHz reference
Reference input frequency
Reference input amplitude
Reference output frequency
Reference output amplitude
Connector
Sweep time
Range
Sweep mode
Trigger source
Trigger slope
10ms to 3000s, Span≥100 Hz;100µs to 100s, Span = 0 Hz (zero span)
Continuous, single
Free run, Line trigger, External trigger
Positive or Negative edge available
Sweep specifications
Level display range
Log scale
Linear scale
Scale units
Sweep (trace) points
Marker level readout resolution
Log scale
Linear scale
Detectors
Number of traces
Level display range
Trace functions
Amplitude specifications(Cont’d)
Level measurement error
±(0.6 dB+frequency response ), all frequency
±1 dB
-110 dBm to +30 dBm steps of 1 dB
0.01 dB
(2.236 µV to 7.07 V)
0
< 1.5:1, (10 MHz to 3 GHz, 10 dB or 20 dB attenuation)
< -70dBc,(Two -30 dBm tones at input mixer, spaced by 1MHz
input attenuation 0 dB, preamp off)
< -60dBc, (-30 dBm signal at input mixer)
<-88dBm, (Input terminated 50Ω and 0 dB RF attenuation, preamplifier off)
< -70dBc, (Mixer signal level at -40 dBm, input attenuation 0 dB, preamp off)
Frequency response
Setting range
Setting resolution Log scale
Linear scale Same as log
Accuracy
RF Input VSWR (at tuned frequency)
Spurious response
Second harmonic distortion
Third order intermodulation distortion
Input related spurious
Inherent residual response
Reference level
10 dB to 100 dB, 10 divisions displayed; 1, 2, 5, 10 dB/division
0% to 100%, 10 divisions displayed
dBm, dBmV, dBuV, dBuV/m, uV, mV, V, mW, W
501
0.01 dB
≤1% of signal level Nominal
Normal, Positive peak, Sample, Negative peak
3
Clear/write, Maximum hold, Minimum hold, View
Model No
GA4062 GA4032 GA4033 GA4063 GA4064
Model No