User's Guide

1-Piece (AT1) Offender User Guide
6
Responding to Vibrations/Flashing LEDs
The device will vibrate three consecutive times if an alarm has been generated. View
the flashing LED(s) on the top of the device and follow the below steps to clear the
alarm.
Red PWR
The device battery is low. Connect the device to the charger.
Once the device is fully charged, it will vibrate once and the PWR LED will be solid
green. Disconnect the device from the charger.
Note: The 1-Piece must be charged for a minimum of 2 hours per day.
Red GPS
The device has lost GPS. Walk outside with the device uncovered and ensure that you
are in an area with a clear view of the sky (do not stand under trees, building awnings,
etc.).
When the device reacquires GPS, the GPS LED will stop blinking.
Red Zone
You are either in a forbidden area (for instance, a school zone) or not in a location
where you are scheduled to be (for instance, work).
If you are in a forbidden area, leave the area immediately.
If you are not in the scheduled location, travel to that area as quickly as possible.
When the alarm has cleared, the Zone LED will stop blinking.
Red PWR, GPS, ZONE
Your officer has sent an alert requesting that you contact them as soon as possible.
Press the Acknowledge button on the top of the device. The PWR, GPS, and ZONE LEDs
will stop flashing.