User's Manual
Table Of Contents
- Default Notification Options
- Finish Enrollment
- Notification Contacts
- Finish Enrollment
- 2. Move your mouse cursor over the Rule Functions dropdown menu and left click Edit.
- 3. You will be redirected to the Edit Rule page.
- 4. Enable the Caller ID feature.
- a. Click the box next to Enabled
- b. Enter the offender’s home phone number or click the Home Phone # box if the offender’s phone number was entered on the Offender’s General Information page
- 5. Scroll down to the Permanent Rule Schedule.
- 1. Move your cursor over the Hardware Functions menu.
- 2. Left click Unassign.
- 3. Click the checkbox next to the Base Unit 3000 and bracelet (see below).
- 4. Click the Save button.
- 5. A popup will generate with a warning that the unassignment is immediate. Click OK.
- 6. You will be returned to the Offender Information page, where the hardware will be pending unassignment. The device is now required to call 3M Electronic Monitoring and transmit its final data. The hardware will only be unassigned once this final ca...
- 4. Click the Land option.
- 5. Click on the checkbox next to Base Unit Callback and enter the phone number where the Base Unit 3000 will call from. This information must be entered in order to access the Download Events function.
2 Way Bracelet Attachment
Attaching the 2 Way Bracelet
Step 1:
Push tamper plugs into the back of the brackets of the Bracelet.
Be sure to insert the left side first. After the left side has been secured, press
the right side of the tamper plug down.
Step 2:
Place the pin tray on a flat surface
(such as a desk) and push one
end of the strap into the pin tray
until it is level with the “lip” of the
pin tray. Ensure that there is no
gap between the end of the
strap and the edge of the pin
tray.
Issue Date: 8/19/2015
22