User's Manual
Table Of Contents
- Default Notification Options
- Finish Enrollment
- Notification Contacts
- Finish Enrollment
- 2. Move your mouse cursor over the Rule Functions dropdown menu and left click Edit.
- 3. You will be redirected to the Edit Rule page.
- 4. Enable the Caller ID feature.
- a. Click the box next to Enabled
- b. Enter the offender’s home phone number or click the Home Phone # box if the offender’s phone number was entered on the Offender’s General Information page
- 5. Scroll down to the Permanent Rule Schedule.
- 1. Move your cursor over the Hardware Functions menu.
- 2. Left click Unassign.
- 3. Click the checkbox next to the Base Unit 3000 and bracelet (see below).
- 4. Click the Save button.
- 5. A popup will generate with a warning that the unassignment is immediate. Click OK.
- 6. You will be returned to the Offender Information page, where the hardware will be pending unassignment. The device is now required to call 3M Electronic Monitoring and transmit its final data. The hardware will only be unassigned once this final ca...
- 4. Click the Land option.
- 5. Click on the checkbox next to Base Unit Callback and enter the phone number where the Base Unit 3000 will call from. This information must be entered in order to access the Download Events function.
Base Unit 3000 LEDs and Buttons
Power: The Power LED is solid green when connected to a power source. If the Base Unit 3000 loses power, the
LED will blink red once per second.
Cell/Line: If solid green, the phone line is in use. If cellular coverage is not available at the time of a call, the Base
Unit 3000 will continue to try and call in. The line LED will continue to turn on and off until a call is completed. If
cellular coverage is lost, the Line LED will blink red.
Curfew: When the Curfew LED is blinking red, the offender is not in range of the Base Unit 3000 when the curfew
schedule is in effect.
Ring: The Ring LED will blink red once per second when the device receives a call.
Answer Button: When the device receives a call, hold the Answer button for one second. The device will beep to let
you know that you have answered the call.
Hang Up Button: When the call is complete, press the Hang Up button. The device will beep to let you know that the
call is complete.
Call Button: To make a call to the preprogrammed number, hold the Call button for five seconds.
Issue Date: 8/19/2015
5