User's Manual

Version 1.0 ElmoTech Ltd

DCU & Transmitter Field Installation Manual

Installing the Transmitter

The officer should bring the following equipment for a

Transmitter installation:

• Transmitter

• Male and female strap Clips

• Electronic key

• Strap holder

• Locking tool

• Flat-head screwdriver

Calibrating the Transmitter

Before any installation, the Transmitter has to be turned-on and

calibrated. After the DCU unit is connected and in monitoring

mode, do the following:

1. Stand close to the DCU unit in order to hear the audible

confirmation of the Transmitter calibration.

2. Hold the transmitter in your hand with the 4 metal pins (2

pairs, along the strap) pointing forward.

3. Hold the Electronic Key in your other hand, with the

black button pointing toward the open or free end of the

strap.