User's Manual

ElmoTech Ltd Version 1.0
5. Wait for up to two minutes in each checked location.
During these two minutes four transmissions should be
received from the PID.
If four transmissions are received before two minutes
have elapsed, you can move with the Offender to the next
location to be checked.
If less than four transmissions are received, phone the
Monitor Center/ Agency and ask to change the range
setting to a longer range.
If the range setting is already set at long range,
relocate the DCU unit in order to get better coverage.
6. After satisfactory testing of all relevant locations, ask the
Monitor Center/Agency personnel to end the range test
(manually). If the range is not sufficient, you have to ask
the Monitor Center/Agency to perform a new ‘Start
Range’ with a longer range and then re-test where the
previous test failed.
7. Upon ending the range test, the DCU unit makes an
audible beeping sound to indicate range test completion.
As a precaution against accidentally leaving the DCU
unit in the range-testing mode, the DCU unit
automatically terminates the range test 15 minutes after
initiation. Therefore, if the range test lasts longer than
15 minutes, you will have to request the Monitor Center /
Agency to re-activate it.
DCU & Transmitter Field Installation Manual
21