User's Manual

Version 1.0 ElmoTech Ltd
DCU & Transmitter Field Installation Manual
34
Equipment Needed for Strap Replacement
The following list indicates equipment the Officer will need to
complete a strap replacement:
• 1 Transmitter “body”
• 1 pair of replacement straps (long/medium non-pins side
and long/medium pins side)
• Screw driver
• Extra screws
• Extra strap clasps (male and
• Electronic Key
Replacing the Transmitter Straps
Following are detailed instructions for replacing the Transmitter
straps:
1. Using the screwdriver, open the screw (that holds the strap
clasp) and remove the strap clasp
2. Gently shake the strap loose from the transmitter body. Be
careful not to damage the metal pins on the transmitter
body.
3. Position the new strap over the transmitter body. Notice
that the two small holes on the strap have to lie exactly
over the two metal pins.
4. Gently place the strap down over the metal pins and press
down along the seam of the strap, snugly fitting the entire
strap to the Transmitter.