User's Manual

fire resistance for a polymeric material. The unit case has been tested for free fall and
vibration, as well as a range of climate environment standards.
FCC Notices
The Product complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions:
1) This device may not cause harmful interference
2) This device must accept any interference received, including interference that may cause
undesired operation.
3) Changes or modifications not expressly approved by Elmo Tech Ltd could void the user’s
authority to operate the equipment.
ATIS/ACTA Customer Information
This equipment, Smart Base Unit, model: SBU x000yyy (1), complies with Part 68 of the
FCC Rules and the requirements adopted by the ACTA. On the bottom panel of this
equipment is a label, that contains among other information, a product identifier in the
format US: LSQAL01BSBx000yyy. If requested, this number must be provided to the
Telephone Company.
This equipment is designed for connection to the telephone network using an RJ-11
connector, which is Part 68 compliant. See Installation Instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response to
an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To
be certain of the number of devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company. The REN for Smart Base Unit, model: SBU
x000yyy, is 0.1B.
If the Smart Base Unit, model: SBU x000yyy, causes harm to the telephone network, the
Telephone Company will notify you in advance that temporary discontinuance of service may
be required. If advance notice is not practical, you will be notified as soon as possible. Also,
you will be advised of your right to file a compliant with the FCC if it is necessary.