User's Manual

iDEU-810 Installation and Operational Guide
2 Mounting the Wireless Monitoring
Unit (iDEU-810-4)
For a Wireless Monitoring Unit to receive and transmit signals with
maximum efficiency, it should be mounted on a wall or flat surface and
positioned upright. The Wireless Monitoring Unit should also be mounted
within reach of a power outlet (an electrician my need to install a power
outlet near the chosen Wireless Monitoring Unit location).
Note that the distance between the wall and the Wireless Monitoring
Unit should be at least 10 cm.
There are two ways to mount the Wireless Monitoring Unit. The first is to
mount the Wireless Monitoring Unit on the wall using the fixed mounting
brackets together with the dowel and screw fitting, and the second is to use
the fixed mounting brackets and a Velcro fitting. Both of these fitting
options are supplied with the Wireless Monitoring Unit.
2.1 Permanent Anchor/Dowel Wall Fitting
The anchor/dowel wall fitting is generally used for installing the Wireless
Monitoring Unit in a permanent location.
In order to mount the Wireless Monitoring Unit using the anchor/dowel wall
fittings, perform the following:
1. Place the Wireless Monitoring Unit on its faceplate with the fixed
mounting brackets facing upwards.
2. Make a drilling template by tracing around the mounting brackets on the
back of the Wireless Monitoring Unit onto a piece of A4 paper, not
forgetting to mark the holes for the anchor/dowels.
2-4