User's Manual

iDEU-810 Installation and Operational Guide
3-7
3 Activating the Wireless
Monitoring Unit
In order to activate the Wireless Monitoring Unit, perform the following:
1. Connect the adapter end of the power supply to a power outlet.
2. Connect the small end of the supplied power supply into the 7.5 VDC
power socket located on the side panel of the Wireless Monitoring Unit.
The Wireless Monitoring Unit makes three audible beeping sounds. The
Charge LED on the front panel flashes when the Wireless Monitoring Unit is
first activated. The Charge LED and Power LED light up only after the
backup battery is fully charged. The Wireless Monitoring Unit is now in
monitoring mode.