User's Manual
Table Of Contents
- SAFETY INFORMATION
- Intended Use:
- Safety information for Trained Customer (e.g., officer, agency representative, ministry of justice) and Offender.
- Safety information for Trained Customer only.
- Safety information for Offender only.
- Default Notification Options
- Finish Enrollment
- Basic Rule Setup
- Finish Enrollment
- 1. Click on the Home Curfew Rule (see below).
- 2. Move your cursor over the Rule Functions menu and left click Edit.
- 3. You will be redirected to the Edit Rule page. Scroll down to the Permanent Rule Schedule.
- You can create an Exclusion Rule to ensure that the offender is not entering areas which are forbidden – such as schools, playgrounds, and victims’ residences.
- 1. Move your cursor over the Rule Functions menu (see below).
- 2. Left click Add Zone.
- 1. Move your cursor over the Hardware Functions menu and left click Unassign.
- 2. Click the checkbox next to the 1 Piece (Gen 4) and Beacon (see below).
- 3. Click on the drop-down menu and select an Unassignment Reason. This is required.
- 4. Click the Save button. A popup will generate with a warning that the unassignment is immediate.
- 5. Click OK.
- 6. You will be returned to the Offender Information page, where the Beacon will be unassigned and the 1 Piece (Gen 4) will be pending unassignment. The 1 Piece (Gen 4) is now required to call 3M Electronic Monitoring and transmit its final data. It wi...
16
Beacon Operating Features
Home/Away Status
When the 1 Piece (Gen 4) is in range of the Beacon, it will start receiving signals from
the Beacon and will record a “Home” status. The 1 Piece (Gen 4) will remain in the
“Home” status until it is taken out of range of the Beacon.
When the 1 Piece (Gen 4) is taken out of range of the Beacon, it will stop receiving
signals from the Beacon. When the 1 Piece (Gen 4) is out of range for five consecutive
minutes, it will record an “Away” status.
Note: The “Home” status indicates that the 1 Piece (Gen 4) is within range of the
Beacon. The “Away” status indicates that the 1 Piece (Gen 4) is not within range of the
Beacon.
GPS Off/No GPS Icons
When the 1 Piece (Gen 4) is within range of the Beacon, in the “Home” Status, for two
consecutive minutes, GPS will be turned off. While GPS is turned off, an icon will
appear on the EM Manager (Smart View) map in place of the “No GPS” icon. The icon
will read “GPS Off.”
GPS will be reacquired when the offender moves out of range of the Beacon for one
minute or when a Base Location Un-trusted or A/C Power Loss violation has been
generated.
While the offender is in the “Away” status, if the offender loses GPS, the “No GPS”
icon will appear on the EM Manager (Smart View) map.