User's Manual
Table Of Contents
- SAFETY INFORMATION
- Intended Use:
- Safety information for Trained Customer (e.g., officer, agency representative, ministry of justice) and Offender.
- Safety information for Trained Customer only.
- Safety information for Offender only.
- Default Notification Options
- Finish Enrollment
- Basic Rule Setup
- Finish Enrollment
- 1. Click on the Home Curfew Rule (see below).
- 2. Move your cursor over the Rule Functions menu and left click Edit.
- 3. You will be redirected to the Edit Rule page. Scroll down to the Permanent Rule Schedule.
- You can create an Exclusion Rule to ensure that the offender is not entering areas which are forbidden – such as schools, playgrounds, and victims’ residences.
- 1. Move your cursor over the Rule Functions menu (see below).
- 2. Left click Add Zone.
- 1. Move your cursor over the Hardware Functions menu and left click Unassign.
- 2. Click the checkbox next to the 1 Piece (Gen 4) and Beacon (see below).
- 3. Click on the drop-down menu and select an Unassignment Reason. This is required.
- 4. Click the Save button. A popup will generate with a warning that the unassignment is immediate.
- 5. Click OK.
- 6. You will be returned to the Offender Information page, where the Beacon will be unassigned and the 1 Piece (Gen 4) will be pending unassignment. The 1 Piece (Gen 4) is now required to call 3M Electronic Monitoring and transmit its final data. It wi...
26
Offender Enrollment, Cont.
Demographic Data
1. Enter the Offender's Information.
• All fields with red asterisks (*) are required fields
2. Click the Map button to geo-code the offender’s address.
3. Select the Offender Type.
4. Select the Time Zone.
Hardware Assignment
5. Locate the serial number on the device(s).
6. Click on the drop down menu and select that serial number for the
device.
Basic Rule Setup
7. Do NOT check the box next to Home Zone in the Basic Rule Set Up. No
home zone is needed if a Beacon is being utilized.
8. Choose the appropriate Contact from the Notification Contact drop
down list. The selected Contact will be notified for all rules.
9. Click the Add button.
10. Select the type of Notification (if you haven’t chosen your Default
Notification Method on your Contact record)
• Pager
• Fax
• E-mail
• Text Message
Finish Enrollment
11. When you have completed entering the information, click Save.